Garage Door Repair Facts

If you own a car, having a secure garage with properly functioning garage doors and garage door openers is essential. At the same time, knowing how to make a garage door repair in the event that something goes wrong with your system is critical. Learn more about North Vancouver. Overhead garage door openers are powered by springs, therefore garage door repair is rather simple. The following are some of the steps you could take:

o Tighten the bolts or screws at the brackets if the door openers’ metal tracks are loose. If you discover that the tracks are badly broken when doing the repair, replace them.

o Check that the door openers’ tracks are properly aligned. On the garage walls, both tracks must be at the same height. If you discover that the tracks are not aligned properly when completing the repair, release the bolts and carefully tap the track into place. After you’ve finished, make sure to tighten the nuts.

o Clean the tracks with a concentrated home cleanser while completing garage door repairs to remove grime and hardened oil. Thoroughly clean the rollers, then dry the tracks and rollers.

o Lubricate the rollers and tracks using silicone spray and household oil in the rollers and lubricant spray or powdered graphite in the tracks.

o Make sure to check for any loose hardware throughout the repair and tighten it as needed. Check the plates where the spring is mounted on garage gate openers with swing-up systems to make sure the screws are secure. In all other circumstances, inspect the hinges and replace those that are damaged. If one of the openers is sagging on one side, the hinges should be serviced. Check for cracks or chips in the wood on which the hinge is mounted.