Unknown Facts About Charlotte Roof Repair

Roofs that are flat are not the same as roofs that are sloped. Water will flow down slanted roofs and into drains. On flat roofs, however, this is not the case. Water cannot fall through the roof and cause leaks in the house unless the entire flat roof has a layer of watertight seal. Flat roofs, like sloped roofs, can be damaged and need roof repair. It’s a good thing that you can patch flat roofs if you know what you’re doing. How do you go about doing it? Here’s how to do it.
The first step is to gather the materials you’ll need for the roof repair. A mallet, roofing nails, a putty knife, a utility knife, brooms, and roofing cement should all be on hand. This is everything you’ll need to fix your flat roof.You may want to check out Charlotte roof repair for more.



To begin roof repair, go up to your roof and assess the situation. If you notice any peeled areas or cracks, take the following steps: Use the broom to remove the dust and dirt from the roof. Roofing cement will not adhere to dirty surfaces, so make sure the whole area is clean before proceeding. Cut a form out of the region where the fracture or peel was found. Use the same shapes whether there are several fractures or peels for consistency. Create a pattern on the replacement shingles with the cut form. The size and shape of the replacement shingle you make should be exact. Build several replacement shingles if you made a mistake with the size so that the shingles are on the same level as the area on it. Make a new shingle to replace the old one. This one needs to be at least 2 inches bigger than the others.
Place the putty knife in the edge region. Underneath the corners, apply roofing cement. Attach the shingle to the hole and secure it with a nail. Set the shingle in place with cement. The other shingles must not be cemented if you are going to use multiple shingles to level the field. Simply hammer it in place with nails. Apply roofing cement to the edges of the larger replacement shingle and tack it down to the area.
If your flat roof has split shingles, you’ll need to use a different method. To begin, cut the shingle in half. Open the slashed area and cover it with roofing cement. Tack down the sides of the shingle with roofing nails. Replace a shingle using a process similar to the one mentioned in the section on fixing broken areas.

CONTACT INFO :

Southern Star Roofing
6132 Brookshire Blvd Suite I, Charlotte NC 28216
Phone No. : 704-937-7663